Shuttle BareBone XS36V4 - Black


  • Fanless and silent
    Completely fanless, no
    fan noise at all
    Passive cooling through
    convective heat transfer

    Perfect to be used in noise-sensitive environments

    Fanless means less dust and thus virtually no maintenance
    required

    Notice: Please
    make sure the system is always operated in 

    upright position using either its stand or the optional VESA
    mount. 

    Ventilation holes must not be blocked to ensure sufficient
    cooling.

  • Low power consumption

    Power consumption: ca. 8.7 W (idle mode) and ca. 16.3 W (full
    load)

    (Configuration: 4 GB RAM, 120 GB SSD and Windows 8.1)

  • Chassis

    Dimensions without stand: 20 x 16 x 3.6 cm (DxHxW) = 1.15
    litres

    Weight: 2.1 kg net, 2.8 kg gross

    Hole for Kensington Lock at the back panel

    Optional accessory: 75mm and 100mm VESA mounting kit (PV03)

  • Operation System

    This system comes without operating system.

    It is compatible with Windows 8 / 8.1 (64 bit), Windows 7 (64
    bit) [2] and Linux (64
    bit) [3]

  • Processor

    Intel Celeron J1900, Quad Core

    CPU clock frequency: 2.00 GHz, max. Turbo frequency: 2.42 GHz

    Silvermont architecture, Bay Trail-D platform, 22nm structure

    CPU cores/Threads: 4/4

    Cache: 2 MB

    Thermal Design Power (TDP): 10W

    SOC design with integrated graphics processor

  • Integrated Graphics

    The Graphics Processing Unit (GPU) is integrated into the
    processor

    Intel HD Graphics (7th gen), graphics frequency: 688~854 MHz

    Supports DirectX 11.0, OpenGL 4.0, OpenCL 1.2, HDCP 1.3
    (Blu-ray)

    Execution Units (EU): 4

    Three video outputs:

    - HDMI: max. 1920x1200 resolution @ 60Hz

    - Display Port: max. 2560x1600 resolution @ 60Hz

    - D-Sub (VGA): max. 1920x1200 resolution @ 60Hz

    Dual display: supports max. two independent displays

    Full hardware acceleration:

    - for decode: H.264, MPEG2, MVC, VC-1, VP8, MJPEG 

    - for encode: H.264, MPEG2, MVC

  • UEFI Firmware

    8Mbit Flash ROM with AMI's Aptio UEFI BIOS Firmware

    Based on the Unified Extensible Firmware Interface
    (UEFI) [1]

    Supports Power fail resume / AC power on state / always on / always
    off

    Supports Wake-on-LAN (WOL) from S3, S3, S5 ACPI states

    Supports boot up from external flash memory cards

  • Memory

    1x SO-DIMM slot with 204 pins

    Supports one module DDR3L-1333 (PC3-10600) at 1.35V

    Maximum capacity: 8 GB

    DDR3L-1600 is supported at DDR3L-1333 clock rate

    Caution: This
    mainboard does only support 1.35V DDR3L memory modules.

    Note: DDR3L has a lower operation voltage compared to DDR3

  • Hard disk drive/SSD (2.5")

    Supports one Serial ATA hard disk (5400 / 7200 rpm)

    or one SATA SSD drive in 6.35cm/2.5" format

    Serial ATA II Interface with up to 300 MB/s transfer speed

    Supports a drive with max. 9.5 mm height

    Supports Unified Extensible Firmware Interface (UEFI)

  • Integrated Audio

    Realtek ALC269 Audio Codec with Azalia and D3 mode support

    Two analog audio connectors (3.5mm): 

    1) Line out (head phone)

    2) Microphone input

  • Card Reader

    Integrated card reader supports SD, SDHC and SDXC memory flash
    cards

  • Wired Network

    RJ45 connector supports Gigabit LAN at 10/100/1000 Mbit/sec.

    Network controller Realtek RTL8411

    Supports Wake-on-LAN (WOL) from S3, S3, S5 ACPI states

  • Wireless Network (WLAN)

    Half-size Mini PCIe card with RTL8188EE chip

    Supports IEEE 802.11b/g/n, max. 150Mbps up-/downstream

    Security: WPA/WPA2(-PSK), WEP 64/128bit, IEEE 802.11x/i

  • LEDs and Buttons

    Power button

    Power LED (blue)

  • Front Panel Connectors

    2x RS232 serial ports (supports 5V/12V auxiliary voltage,

    the upper port is switchable to RS422 / RS485)

    1x USB 2.0

    SD card reader

  • Back Panel Connectors

    HDMI digital video and audio output

    DisplayPort digital video and audio output

    D-Sub/ VGA analog video output (15 pin)

    1x USB 3.0

    3x USB 2.0

    Gigabit network (LAN, RJ45)

    Audio Line-out (head phone)

    Microphone input

    DC input for the external power adapter

  • Power Supply

    External 40W AC/DC power adapter (fanless), 19V / 2.1A

    AC Input: 100~240V AC, 50~60Hz

    Automatic voltage adjust

    Dimensions: 89.5 x 37 x 26.5 mm (LWH)

    DC Connector: 5.5/2.5mm (outer/inner diameter)

  • Optional Accessories

    VESA mount made of metal (PV03)

  • 24/7 nonstop operation

    This device is approved for 24/7 permanent operation.

    Requirements:

    - Free circulation of air amongst the PC must be guaranteed.

    - Ventilation holes must be clear.

    - If a hard disk is installed, this must also be approved for
    permanent 

    operation by its manufacturer.

  • Environmental Spec

    Operating temperature range: 0~35°C

    Relative humidity range: 10~90% (non-condensing)

  • Certification and Compliance

    EMI: CE, FCC, BSMI, C-Tick, CCC

    Safety: CB, BSMI, ETL

    Other compliances: RoHS, Eup Lot6

    This device is classed as a technical information

    equipment (ITE) in class B and is intended for use in 

    living room and office. The CE-mark approves the 

    conformity by the EU-guidelines:

    - EMV-guideline 89/336/EWG electromagnetic tolerance

    - LVD-guideline 73/23/EWG use of electric devices 

    within certain voltage-limits



[1] UEFI-Firmware (versus BIOS)
Just as many modern PCs, the XS36V4 does away completely with a BIOS, but uses a pure *) UEFI firmware instead. The terms UEFI firmware and BIOS are widely used synonymously, but hardware initialising is now performed by the UEFI. Users might not even notice, but the operating system must be installed and executed in UEFI mode. UEFI creates a GUID Partition Table (GPT) on the system partition instead of a Master Boot Record (MBR). A PC running UEFI firmware alone but have a 64-bit operating system installed.
*) Notice: In transition period from BIOS to UEFI mainboard manufacturers still used to employ a traditional BIOS for compatibility reasons. Thanks to the integrated "Compatibility Support Module" (CSM), older Windows versions could boot from mainboards with a UEFI firmware.
[2] Windows 7 64-bit is supported since BIOS version XS36V400.110. If a BIOS update is required, the built-in UEFI shell must be used. Please refer to the FAQ section on the Shuttle website for more information on this matter. Prior to the installation of Windows 7, BIOS must be entered and "Windows 7" must be selected as the operating system under "Boot", "OS-Selection".
[3] Linux 64-bit: A number of Linux distributions with updated Kernel versions have already been tested successfully (date: June 2014). Please refer to the FAQ section on the Shuttle website for more information on this matter.
Ilustrativní obrázek
Fanless and silent Completely fanless, no fan noise at all Passive cooling through convective heat transfer Perfect to be used in noise sensitive environments Fanless means less Celý popis
Ilustrativní obrázek
ilustrační obrázek
5 568 Kč
4601 Kč bez DPH
€ 205.89
5568 Kč v úvodu příštího roku počítačové skříně
Dostupné:
v úvodu příštího roku
  ks
Kup najisto
DPH:21 %
Hmotnost:0.1 kg


 

  • Fanless and silent
    Completely fanless, no
    fan noise at all
    Passive cooling through
    convective heat transfer

    Perfect to be used in noise-sensitive environments

    Fanless means less dust and thus virtually no maintenance
    required

    Notice: Please
    make sure the system is always operated in 

    upright position using either its stand or the optional VESA
    mount. 

    Ventilation holes must not be blocked to ensure sufficient
    cooling.

  • Low power consumption

    Power consumption: ca. 8.7 W (idle mode) and ca. 16.3 W (full
    load)

    (Configuration: 4 GB RAM, 120 GB SSD and Windows 8.1)

  • Chassis

    Dimensions without stand: 20 x 16 x 3.6 cm (DxHxW) = 1.15
    litres

    Weight: 2.1 kg net, 2.8 kg gross

    Hole for Kensington Lock at the back panel

    Optional accessory: 75mm and 100mm VESA mounting kit (PV03)

  • Operation System

    This system comes without operating system.

    It is compatible with Windows 8 / 8.1 (64 bit), Windows 7 (64
    bit) [2] and Linux (64
    bit) [3]

  • Processor

    Intel Celeron J1900, Quad Core

    CPU clock frequency: 2.00 GHz, max. Turbo frequency: 2.42 GHz

    Silvermont architecture, Bay Trail-D platform, 22nm structure

    CPU cores/Threads: 4/4

    Cache: 2 MB

    Thermal Design Power (TDP): 10W

    SOC design with integrated graphics processor

  • Integrated Graphics

    The Graphics Processing Unit (GPU) is integrated into the
    processor

    Intel HD Graphics (7th gen), graphics frequency: 688~854 MHz

    Supports DirectX 11.0, OpenGL 4.0, OpenCL 1.2, HDCP 1.3
    (Blu-ray)

    Execution Units (EU): 4

    Three video outputs:

    - HDMI: max. 1920x1200 resolution @ 60Hz

    - Display Port: max. 2560x1600 resolution @ 60Hz

    - D-Sub (VGA): max. 1920x1200 resolution @ 60Hz

    Dual display: supports max. two independent displays

    Full hardware acceleration:

    - for decode: H.264, MPEG2, MVC, VC-1, VP8, MJPEG 

    - for encode: H.264, MPEG2, MVC

  • UEFI Firmware

    8Mbit Flash ROM with AMI's Aptio UEFI BIOS Firmware

    Based on the Unified Extensible Firmware Interface
    (UEFI) [1]

    Supports Power fail resume / AC power on state / always on / always
    off

    Supports Wake-on-LAN (WOL) from S3, S3, S5 ACPI states

    Supports boot up from external flash memory cards

  • Memory

    1x SO-DIMM slot with 204 pins

    Supports one module DDR3L-1333 (PC3-10600) at 1.35V

    Maximum capacity: 8 GB

    DDR3L-1600 is supported at DDR3L-1333 clock rate

    Caution: This
    mainboard does only support 1.35V DDR3L memory modules.

    Note: DDR3L has a lower operation voltage compared to DDR3

  • Hard disk drive/SSD (2.5")

    Supports one Serial ATA hard disk (5400 / 7200 rpm)

    or one SATA SSD drive in 6.35cm/2.5" format

    Serial ATA II Interface with up to 300 MB/s transfer speed

    Supports a drive with max. 9.5 mm height

    Supports Unified Extensible Firmware Interface (UEFI)

  • Integrated Audio

    Realtek ALC269 Audio Codec with Azalia and D3 mode support

    Two analog audio connectors (3.5mm): 

    1) Line out (head phone)

    2) Microphone input

  • Card Reader

    Integrated card reader supports SD, SDHC and SDXC memory flash
    cards

  • Wired Network

    RJ45 connector supports Gigabit LAN at 10/100/1000 Mbit/sec.

    Network controller Realtek RTL8411

    Supports Wake-on-LAN (WOL) from S3, S3, S5 ACPI states

  • Wireless Network (WLAN)

    Half-size Mini PCIe card with RTL8188EE chip

    Supports IEEE 802.11b/g/n, max. 150Mbps up-/downstream

    Security: WPA/WPA2(-PSK), WEP 64/128bit, IEEE 802.11x/i

  • LEDs and Buttons

    Power button

    Power LED (blue)

  • Front Panel Connectors

    2x RS232 serial ports (supports 5V/12V auxiliary voltage,

    the upper port is switchable to RS422 / RS485)

    1x USB 2.0

    SD card reader

  • Back Panel Connectors

    HDMI digital video and audio output

    DisplayPort digital video and audio output

    D-Sub/ VGA analog video output (15 pin)

    1x USB 3.0

    3x USB 2.0

    Gigabit network (LAN, RJ45)

    Audio Line-out (head phone)

    Microphone input

    DC input for the external power adapter

  • Power Supply

    External 40W AC/DC power adapter (fanless), 19V / 2.1A

    AC Input: 100~240V AC, 50~60Hz

    Automatic voltage adjust

    Dimensions: 89.5 x 37 x 26.5 mm (LWH)

    DC Connector: 5.5/2.5mm (outer/inner diameter)

  • Optional Accessories

    VESA mount made of metal (PV03)

  • 24/7 nonstop operation

    This device is approved for 24/7 permanent operation.

    Requirements:

    - Free circulation of air amongst the PC must be guaranteed.

    - Ventilation holes must be clear.

    - If a hard disk is installed, this must also be approved for
    permanent 

    operation by its manufacturer.

  • Environmental Spec

    Operating temperature range: 0~35°C

    Relative humidity range: 10~90% (non-condensing)

  • Certification and Compliance

    EMI: CE, FCC, BSMI, C-Tick, CCC

    Safety: CB, BSMI, ETL

    Other compliances: RoHS, Eup Lot6

    This device is classed as a technical information

    equipment (ITE) in class B and is intended for use in 

    living room and office. The CE-mark approves the 

    conformity by the EU-guidelines:

    - EMV-guideline 89/336/EWG electromagnetic tolerance

    - LVD-guideline 73/23/EWG use of electric devices 

    within certain voltage-limits


[1] UEFI-Firmware (versus BIOS)
Just as many modern PCs, the XS36V4 does away completely with a BIOS, but uses a pure *) UEFI firmware instead. The terms UEFI firmware and BIOS are widely used synonymously, but hardware initialising is now performed by the UEFI. Users might not even notice, but the operating system must be installed and executed in UEFI mode. UEFI creates a GUID Partition Table (GPT) on the system partition instead of a Master Boot Record (MBR). A PC running UEFI firmware alone but have a 64-bit operating system installed.
*) Notice: In transition period from BIOS to UEFI mainboard manufacturers still used to employ a traditional BIOS for compatibility reasons. Thanks to the integrated "Compatibility Support Module" (CSM), older Windows versions could boot from mainboards with a UEFI firmware.
[2] Windows 7 64-bit is supported since BIOS version XS36V400.110. If a BIOS update is required, the built-in UEFI shell must be used. Please refer to the FAQ section on the Shuttle website for more information on this matter. Prior to the installation of Windows 7, BIOS must be entered and "Windows 7" must be selected as the operating system under "Boot", "OS-Selection".
[3] Linux 64-bit: A number of Linux distributions with updated Kernel versions have already been tested successfully (date: June 2014). Please refer to the FAQ section on the Shuttle website for more information on this matter.

Jste spokojeni s kvalitou popisu produktu? Napište nám

E-mail: Váš e-mail pro odpověď
Text:


KUPTE TOTO ZBOŽÍ DNES A ZAPLAŤTE JEJ AŽ PO VYZKOUŠENÍ.

KUP NAJISTO - Nová platební služba pro jistotu při nakupování.

Vyzkoušejte vaše zboží doma, zaplaťte za 14 dní.

Pro schválení služby Kup Najisto budete přesměrováni na stránky pro ověření Vaší identity. Podle výše Vašeho nákupu můžeme k ověření Vaší identity požadovat i rodné číslo, případně číslo občanského průkazu.

Údaje zpracováváme zabezpečeně a v souladu se Zákonem o ochraně osobních údajů.
Platební služba Kup Najisto není určena pro podnikatele a firmy (držitelé IČ).

 
 

Rodina NWT

Nákup bez obav

Patro.cz

Rychlý kontakt

Tento web používá k poskytování služeb, personalizaci reklam a analýze návštěvnosti soubory cookie. Používáním tohoto webu s tím souhlasíte.