Shuttle XPC Slim BareBone XS36V5 - Black


  • Fanless and silent
    Completely fanless,
    virtualy noiseless
    Passive cooling through
    convective heat transfer

    Perfect to be used in noise-sensitive environments

    Fanless means less dust and thus virtually no maintenance
    required

  • Low power consumption

    Power consumption: ca. 8.4 W (idle mode) and ca. 19.6 W (full
    load)

    (Configuration: 4 GB RAM, 64 GB SSD and Windows 8.1)

  • Operation Position

    Please make sure the system is always operated in

    upright position using either its stand or the optional VESA
    mount.

    Ventilation holes must not be blocked to ensure sufficient
    cooling.

  • Chassis

    Dimensions without stand: 20 x 16 x 3.6 cm (DxHxW) = 1.15
    litres

    Hole for Kensington Lock at the back panel

    Optional accessory: 75mm and 100mm VESA mounting kit (PV03)

  • Operation System

    This system comes without operating system.

    It is compatible with Windows 7 / 8.1 / 10 (64-bit) und Linux
    (64-bit) [3]

    Caution: Windows 8 is not supported

  • Processor

    Intel Celeron N3050, Dual Core

    CPU clock frequency: 1.6 GHz, max. Turbo frequency: 2.16 GHz

    Braswell platform, Airmont architecture, 14 nm structure

    CPU cores / Threads: 2 / 2

    Cache: 2 MB

    Thermal Design Power (TDP): 6 W

    Scenario Design Power (SDP): 4 W

    Supports AES-NI and VT-x

    SOC design with integrated graphics processor, no chipset
    required

  • Integrated Graphics

    The Graphics Processing Unit (GPU) is integrated into the
    processor

    Intel HD Graphics (8th Gen), graphics frequency: 320~600 MHz

    Supports DirectX 11.2, OpenGL, Quick Sync

    Execution Units (EU): 12

    Three video outputs:

    - HDMI 1.4b: max. 1920 x 1200 resolution @ 60Hz

    - Display Port 1.1a: max. 2560 x 1600 resolution @
    60Hz [2]

    - D-Sub (VGA): max. 1920 x 1200 resolution @ 60Hz

    Triple display: supports max. three independent displays
    simultaneously

  • UEFI Firmware

    8Mbit Flash ROM with AMI's Aptio UEFI BIOS Firmware

    Based on the Unified Extensible Firmware Interface
    (UEFI) [1]

    Supports Power fail resume / AC power on state / always on / always
    off

    Supports Wake-on-LAN (WOL) from S3, S3, S5 ACPI states

    Supports boot up from external flash memory cards

  • Memory

    1x SO-DIMM slot with 204 pins

    Supports one module DDR3L-1333 (PC3-10600) at 1.35V

    Maximum capacity: 8 GB

    DDR3L-1600 is supported at DDR3L-1333 clock rate

    Caution: This
    mainboard does only support 1.35V DDR3L memory modules.

    DDR3L has a lower operation voltage compared to DDR3

  • Hard disk drive/SSD (2.5")

    Supports one Serial ATA hard disk (5400 / 7200 rpm)

    or one SATA SSD drive in 6.35cm/2.5" format

    Serial ATA III Interface with up to 600 MB/s transfer speed

    Supports a drive with a max. height 9.5 mm

    Supports Unified Extensible Firmware Interface (UEFI)

  • Integrated Audio

    Realtek ALC269 Audio Codec with Azalia and D3 mode support

    Two analog audio connectors (3.5mm): 

    1) Line out (head phone)

    2) Microphone input

  • Card Reader

    Integrated card reader 

    supports standard SD, SDHC and SDXC memory flash cards

  • Wired Network

    RJ45 connector supports Gigabit LAN at 10/100/1000 Mbit/sec.

    Intel i211 Ethernet Controller with MAC, PHY and PCIe interface

    Supports Wake-on-LAN

  • Wireless Network (WLAN)

    Half-size Mini PCIe WLAN card

    Supports IEEE 802.11b/g/n, max. 150Mbps up-/downstream (1T1R)

  • LEDs and Buttons

    Power button

    Power LED (blue)

  • Front Panel Connectors

    2x RS232 serial ports (support of an auxiliary voltage of
    5//12V,

    the upper port is switchable to RS422 / RS485)

    1x USB 2.0

    SD card reader

  • Back Panel Connectors

    HDMI 1.4b digital video and audio output

    DisplayPort 1.1a digital video and audio output

    D-Sub/ VGA analog video output (15-pin)

    2x USB 3.0

    2x USB 2.0

    Gigabit network (LAN, RJ45)

    Audio Line-out (head phones)

    Microphone input

    DC input for the external power adapter

  • Power Supply

    External 40W AC/DC power adapter (fanless)

    AC Input: 100~240V AC, 50~60 Hz

    DC Output: 19V / 2.1 A

    Automatic voltage adjust

    Dimensions: 89.5 x 37 x 26.5 mm (LWH)

    DC Connector: 5.5/2.5mm (outer/inner diameter)

  • Optional Accessories

    VESA mount made of metal (PV03)

  • 24/7 Nonstop Operation

    This device is approved for 24/7 permanent operation.

    Requirements:

    - Free air circulation around the PC must be guaranteed.

    - Ventilation holes must be kept clear.

    - Any installed hard disk must also be approved for
    permanent 

    operation by its manufacturer (max. one hard disk)

  • Environmental Spec

    Operating temperature range: 0~35°C

    Relative humidity range: 10~90% (non-condensing)

  • Certification and Compliance

    EMI: FCC, CE, BSMI, C-Tick

    Safety: ETL, CB, BSMI

    Other: RoHS, Energy Star, ErP

    This device is classed as a technical information equipment (ITE)
    in class B and is intended for use in living room and office. The
    CE-mark approves the conformity by the EU directives:

    (1) 2004/108/EC relating to electromagnetic compatibility
    (EMC),

    (2) 2006/95/EC relating to Electrical Equipment designed for use
    within certain voltage limits (LVD),

    (3) 2009/125/EC relating to ecodesign requirements for
    energy-related products (ErP),

    (4) 1999/5/EC related to Radio and Telecommunications Terminal
    Equipment (R&TTE)



[1] UEFI-Firmware (versus BIOS)
Just as with many modern PCs, the XS35V4 does away completely with a BIOS, but uses a pure *) UEFI firmware instead. The terms UEFI firmware and BIOS are widely used synonymously, but hardware initialising is now performed by the UEFI. Users might not even notice, but the operating system must be installed and executed in UEFI mode. UEFI creates a GUID Partition Table (GPT) on the system partition instead of a Master Boot Record (MBR). A PC running pure UEFI firmware alone must have a 64-bit operating system installed.
[2] 4K resolution
Playback of videos in 4K resolution (3840x2160) at 30Hz is technically possible through both HDMI and DisplayPort. However Shuttle does not recommend it, as the refresh rate appears to be too low for cursor moves and the processor performance is considered to be not sufficient for fluent playback of 4K content.
[3] Selection of the Operation Systrem
Prior to the installation of the operation system, please enter BIOS (press "Delete" key while booting), switch to "Boot" menu and then change the setting "OS Select" according to the operation system used.
Ilustrativní obrázek
Fanless and silent Completely fanless, virtualy noiseless Passive cooling through convective heat transfer Perfect to be used in noise sensitive environments Fanless means less dust and thus virtually no maintenance required Low power consumption Power consumption ca. Celý popis
Ilustrativní obrázek
ilustrační obrázek
Dostupné: Produkt se již nedodává
Chci být informován, až bude produkt dostupný.


Zaslání informace o dostupnosti zboží

Pokud chcete, abychom Vám zaslali informaci, až bude produkt opět dostupný. Klikněte na tlačítko odeslat žádost.

Informace Vám bude odeslána na e-mail:

Kup najisto
DPH:21 %
Hmotnost:0.1 kg


 

  • Fanless and silent
    Completely fanless,
    virtualy noiseless
    Passive cooling through
    convective heat transfer

    Perfect to be used in noise-sensitive environments

    Fanless means less dust and thus virtually no maintenance
    required

  • Low power consumption

    Power consumption: ca. 8.4 W (idle mode) and ca. 19.6 W (full
    load)

    (Configuration: 4 GB RAM, 64 GB SSD and Windows 8.1)

  • Operation Position

    Please make sure the system is always operated in

    upright position using either its stand or the optional VESA
    mount.

    Ventilation holes must not be blocked to ensure sufficient
    cooling.

  • Chassis

    Dimensions without stand: 20 x 16 x 3.6 cm (DxHxW) = 1.15
    litres

    Hole for Kensington Lock at the back panel

    Optional accessory: 75mm and 100mm VESA mounting kit (PV03)

  • Operation System

    This system comes without operating system.

    It is compatible with Windows 7 / 8.1 / 10 (64-bit) und Linux
    (64-bit) [3]

    Caution: Windows 8 is not supported

  • Processor

    Intel Celeron N3050, Dual Core

    CPU clock frequency: 1.6 GHz, max. Turbo frequency: 2.16 GHz

    Braswell platform, Airmont architecture, 14 nm structure

    CPU cores / Threads: 2 / 2

    Cache: 2 MB

    Thermal Design Power (TDP): 6 W

    Scenario Design Power (SDP): 4 W

    Supports AES-NI and VT-x

    SOC design with integrated graphics processor, no chipset
    required

  • Integrated Graphics

    The Graphics Processing Unit (GPU) is integrated into the
    processor

    Intel HD Graphics (8th Gen), graphics frequency: 320~600 MHz

    Supports DirectX 11.2, OpenGL, Quick Sync

    Execution Units (EU): 12

    Three video outputs:

    - HDMI 1.4b: max. 1920 x 1200 resolution @ 60Hz

    - Display Port 1.1a: max. 2560 x 1600 resolution @
    60Hz [2]

    - D-Sub (VGA): max. 1920 x 1200 resolution @ 60Hz

    Triple display: supports max. three independent displays
    simultaneously

  • UEFI Firmware

    8Mbit Flash ROM with AMI's Aptio UEFI BIOS Firmware

    Based on the Unified Extensible Firmware Interface
    (UEFI) [1]

    Supports Power fail resume / AC power on state / always on / always
    off

    Supports Wake-on-LAN (WOL) from S3, S3, S5 ACPI states

    Supports boot up from external flash memory cards

  • Memory

    1x SO-DIMM slot with 204 pins

    Supports one module DDR3L-1333 (PC3-10600) at 1.35V

    Maximum capacity: 8 GB

    DDR3L-1600 is supported at DDR3L-1333 clock rate

    Caution: This
    mainboard does only support 1.35V DDR3L memory modules.

    DDR3L has a lower operation voltage compared to DDR3

  • Hard disk drive/SSD (2.5")

    Supports one Serial ATA hard disk (5400 / 7200 rpm)

    or one SATA SSD drive in 6.35cm/2.5" format

    Serial ATA III Interface with up to 600 MB/s transfer speed

    Supports a drive with a max. height 9.5 mm

    Supports Unified Extensible Firmware Interface (UEFI)

  • Integrated Audio

    Realtek ALC269 Audio Codec with Azalia and D3 mode support

    Two analog audio connectors (3.5mm): 

    1) Line out (head phone)

    2) Microphone input

  • Card Reader

    Integrated card reader 

    supports standard SD, SDHC and SDXC memory flash cards

  • Wired Network

    RJ45 connector supports Gigabit LAN at 10/100/1000 Mbit/sec.

    Intel i211 Ethernet Controller with MAC, PHY and PCIe interface

    Supports Wake-on-LAN

  • Wireless Network (WLAN)

    Half-size Mini PCIe WLAN card

    Supports IEEE 802.11b/g/n, max. 150Mbps up-/downstream (1T1R)

  • LEDs and Buttons

    Power button

    Power LED (blue)

  • Front Panel Connectors

    2x RS232 serial ports (support of an auxiliary voltage of
    5//12V,

    the upper port is switchable to RS422 / RS485)

    1x USB 2.0

    SD card reader

  • Back Panel Connectors

    HDMI 1.4b digital video and audio output

    DisplayPort 1.1a digital video and audio output

    D-Sub/ VGA analog video output (15-pin)

    2x USB 3.0

    2x USB 2.0

    Gigabit network (LAN, RJ45)

    Audio Line-out (head phones)

    Microphone input

    DC input for the external power adapter

  • Power Supply

    External 40W AC/DC power adapter (fanless)

    AC Input: 100~240V AC, 50~60 Hz

    DC Output: 19V / 2.1 A

    Automatic voltage adjust

    Dimensions: 89.5 x 37 x 26.5 mm (LWH)

    DC Connector: 5.5/2.5mm (outer/inner diameter)

  • Optional Accessories

    VESA mount made of metal (PV03)

  • 24/7 Nonstop Operation

    This device is approved for 24/7 permanent operation.

    Requirements:

    - Free air circulation around the PC must be guaranteed.

    - Ventilation holes must be kept clear.

    - Any installed hard disk must also be approved for
    permanent 

    operation by its manufacturer (max. one hard disk)

  • Environmental Spec

    Operating temperature range: 0~35°C

    Relative humidity range: 10~90% (non-condensing)

  • Certification and Compliance

    EMI: FCC, CE, BSMI, C-Tick

    Safety: ETL, CB, BSMI

    Other: RoHS, Energy Star, ErP

    This device is classed as a technical information equipment (ITE)
    in class B and is intended for use in living room and office. The
    CE-mark approves the conformity by the EU directives:

    (1) 2004/108/EC relating to electromagnetic compatibility
    (EMC),

    (2) 2006/95/EC relating to Electrical Equipment designed for use
    within certain voltage limits (LVD),

    (3) 2009/125/EC relating to ecodesign requirements for
    energy-related products (ErP),

    (4) 1999/5/EC related to Radio and Telecommunications Terminal
    Equipment (R&TTE)


[1] UEFI-Firmware (versus BIOS)
Just as with many modern PCs, the XS35V4 does away completely with a BIOS, but uses a pure *) UEFI firmware instead. The terms UEFI firmware and BIOS are widely used synonymously, but hardware initialising is now performed by the UEFI. Users might not even notice, but the operating system must be installed and executed in UEFI mode. UEFI creates a GUID Partition Table (GPT) on the system partition instead of a Master Boot Record (MBR). A PC running pure UEFI firmware alone must have a 64-bit operating system installed.
[2] 4K resolution
Playback of videos in 4K resolution (3840x2160) at 30Hz is technically possible through both HDMI and DisplayPort. However Shuttle does not recommend it, as the refresh rate appears to be too low for cursor moves and the processor performance is considered to be not sufficient for fluent playback of 4K content.
[3] Selection of the Operation Systrem
Prior to the installation of the operation system, please enter BIOS (press "Delete" key while booting), switch to "Boot" menu and then change the setting "OS Select" according to the operation system used.

Jste spokojeni s kvalitou popisu produktu? Napište nám

E-mail: Váš e-mail pro odpověď
Text:


KUPTE TOTO ZBOŽÍ DNES A ZAPLAŤTE JEJ AŽ PO VYZKOUŠENÍ.

KUP NAJISTO - Nová platební služba pro jistotu při nakupování.

Vyzkoušejte vaše zboží doma, zaplaťte za 14 dní.

Pro schválení služby Kup Najisto budete přesměrováni na stránky pro ověření Vaší identity. Podle výše Vašeho nákupu můžeme k ověření Vaší identity požadovat i rodné číslo, případně číslo občanského průkazu.

Údaje zpracováváme zabezpečeně a v souladu se Zákonem o ochraně osobních údajů.
Platební služba Kup Najisto není určena pro podnikatele a firmy (držitelé IČ).

 
 

Rodina NWT

Nákup bez obav

Patro.cz

Rychlý kontakt

Tento web používá k poskytování služeb, personalizaci reklam a analýze návštěvnosti soubory cookie. Používáním tohoto webu s tím souhlasíte.