Shuttle XPC Slim XH170V BareBone
Zaplatím po vyzkoušení
Chassis Slim 3 litre chassis, colour black Dimensions 240 x 200 x 72 mm (LWH) = 3.5 litre Weight 2.2 kg net, 3.5 kg gross Covers for optical drive and front panel connectors HoleCelý popis
Doprava po celé ČR zdarma
Slim 3-litre chassis, colour: black
Dimensions: 240 x 200 x 72 mm (LWH) = 3.5-litre
Weight: 2.2 kg net, 3.5 kg gross
Covers for optical drive and front panel connectors
Hole for Kensington Lock at the back panel
Operation position horizontal or even vertical with the optional
- Storage Bays
This system features three drive bays:
1) supports one optical drive (ODD) in 5.25"
slimline format with max. 12.7 mm height - this bay can
alternatively be used for a 2.5" drive
2) upper 2.5" bay supports one 2.5" drive
with max. 12.7 mm height
3) lower 2.5" bay supports one 2.5" drive
with max. 9.5 mm height
The system includes the following pre-installed cables:
- 2x Power cables for 2.5" drives (5 Volt )
- 1x SATA cable for one 2.5" drive
- 1x combo connector (SATA and power) for an optical slimline drive
(DVD or Bluray)
note: This system is ready for one 2.5" drive (SSD or
hard disk) and one DVD/Blu-ray drive in slimline format to be
For further 2.5" drives, additional SATA cables and screws are
required. For a possible third 2.5" drive also a Y power cable is
required. (All not included)
- Operation System
This system comes without operating system.
It is compatible with Windows 7 / 8.1 / 10 and Linux - 64 bit.
Note on Windows 7 see 
- Mainboard / Chipset / BIOS
Mainboard FH170V, Mini-ITX form factor 17 x 17 cm, 8 layer
Chipset: Intel® H170 Chipset
(Intel® DH82H170 PCH, Codename "Sunrise Point")
AMI BIOS in 8 Mbit EEPROM with SPI interface
All capacitors are high quality solid capacitors
Supports hardware monitoring and watch dog functionality
Supports Unified Extensible Firmware Interface (UEFI)
Supports power on after power failure 
- Power Adapter
External 90 W power adapter (fanless)
Input: 100~240 V AC, 50/60 Hz
Output: 19 V DC, max. 4.74 A, max. 90 W output wattage
AC Connector with protective-earth contacts, cable length: 1.7m
DC Connector: 5.5 / 2.5mm (outer/inner diameter)
- Processor support
Socket LGA 1151 (H4) supports the sixth generation of
Intel Core i7 / i5 / i3, Pentium and Celeron processors
Maximum supported processor power consumption (TDP) = 65W
Codename "Skylake", 14nm process technology, up to 8 MB of L3
Not compatible with Intel Xeon E3 V5 processors with Socket LGA1151
and processors with the older Socket LGA 1150.
Does not support the unlock-function of Intel K-Series
The processor integrates PCI-Express, memory controller and the
graphics engine on the same die (performance features depending on
Please refer to the support list for detailed processor support
information at global.shuttle.com.
- Processor heat-pipe cooling
Processor cooling with heat-pipe technology and two fans (6cm)
- Memory support
2x SO-DIMM slots with 204 pins
Supports DDR3L-1333/1600 (PC3-10600/12800) SDRAM at 1.35V
Supports maximum total size of 32 GB (max. 16 GB per module)
Supports Dual Channel mode
Supports two unbuffered DIMM modules (no ECC)
mainboard does only support 1.35V DDR3L memory modules. DDR3L has a
lower operation voltage compared to DDR3.
The maximum memory clock rate depends on the processor type.
- Integrated Graphics
The features of the integrated graphics function
depend on the processor type used.
Three digital video
outputs: 2x DisplayPort 1.2 and 1x HDMI 1.4
- supports three independent displays simultaneously 
- supports Full HD resolution at 1920x1200 (1080p/60Hz)
- supports 4K Ultra HD resolution at 3840 x 2160 via DisplayPorts
(2160p/60Hz) and HDMI (2160p/30Hz) 
- supports Blu-ray (BD) playback with HDCP
- supports HD video plus multi-channel digital audio via a single
- 5.1-channel audio
Audio Realtek® ALC 662 5.1-channel High-Definition Audio
Three analog audio connectors (3.5mm) at the back panel:
1) Front line-out (head-phone)
2) Rear Surround line-out (shared with microphone input)
3) Center line-out (shared with line-in)
Digital audio output is provided by HDMI and DisplayPort
- Gigabit LAN Controller
Intel i219LM PHY connected to the MAC of the processor
Supports 10 / 100 / 1.000 MBit/s operation
Supports WAKE ON LAN (WOL)
Supports network boot by Preboot eXecution Environment (PXE)
- M.2 Slot
M.2 2280 slot with SATA v3.0 (6 Gbps) interface
It supports M.2 cards with a width of 22 mm
and a length of 30, 42, 60 or 80 mm (type 2230, 2242, 2260,
It supports M.2 SATA SSDs (with B+M key), but no M.2 PCIe
- Mini PCIe Slot
Mini-PCIe Half-Size slot
with PCIe 2.0 and USB 2.0 interface
supports one optional Wireless Network (WLAN) card
- Drive connectors
3x Serial-ATA connector, max. 6 Gbps
1x external Serial-ATA (eSATA), max. 3 Gbps
1x M.2 SSD (M.2 slot)
Supports RAID 0, RAID 1
Supports Intel® Rapid Storage Technology 13 (RST)
Supports NCQ, AHCI and Hot Plug
package includes pre-installed cables (for SATA and power) and
mounting screws for one 2.5" drive and one for one optical slimline
- Front Panel connectors
Audio Line-out (headphone)
2x USB 3.0
2x USB 2.0
Power LED (blue)
HDD LED (yellow)
- Back Panel connectors
2x DisplayPort 1.2 audio/video output 
HDMI 1.4 audio/video output
2x USB 3.0
2x USB 2.0
GigaBit LAN (RJ45)
RS232 serial port
External Serial ATA (eSATA 3G)
Clear CMOS Button
Perforation for Wireless LAN antennas (2 holes)
Hole for Kensington Lock
- Other onboard connectors
Power on after power fail (hardware solution, Jumper 4) 
Front connectors for power button, LEDs, USBs, audio ports
Three headers 2x5-pin for dual USB 2.0 (one occupied)
Two 4-pin fan connector (one occupied by the CPU cooling
LPC interface (2x10-pin header, 2 mm pitch)
- Supplied Accessories
Multi-language installation guide (EN, DE, FR, ES, JP, KR, SC,
Pre-installed SATA and power cables for one 2.5" drive and one
External power adapter with 1.7m AC power cord (with
Protector cap for the CPU socket (do not use if heat-pipe or fan is
CPU heatpipe cooling system with heatsink compound
Bag with screws
- Optional Accessory
(1) Vertical stand (PS01)
(2) VESA mount (PV02)
(3) WLAN module (WLN-S) 
(4) Cover for slimline drive bay 
(5) 3.5" Hard Disk Rack (PHD4) 
- Environmental Specifications
Operating temperature range: 0~50°C 
Relative humidity range: 10~90% (non-condensing)
- Certifications / Compliance::
EMI: FCC, CE, BSMI, C-Tick
Safety: ETL, CB, BSMI
Other: RoHS, Energy Star 5.0, ErP
This device is classed as a technical information equipment (ITE)
in class B and is intended for use in living room and office. The
CE-mark approves the conformity by the EU directives:
(1) 2004/108/EC relating to electromagnetic compatibility
(2) 2006/95/EC relating to Electrical Equipment designed for use
within certain voltage limits (LVD),
(3) 2009/125/EC relating to ecodesign requirements for
energy-related products (ErP)
 Power on after power fail:
The BIOS setup provides a "Power-On after Power Fail" function that can be found under "Power Management Configuration". As the name indicates, this function determines the PC's behaviour after power failure: (1) unconditional power on, (2) restore former status or (3) keep system turned off. As a matter of the nature of this function, it may fail after short power failures. This is why the XH170V also comes with a hardware-based solution. By removing Jumper 4 (on the mainboard near the "Shuttle" imprint), the system will start unconditionally once power is supplied.
 How to convert DisplayPort into HDMI/DVI
The DisplayPort outputs can be converted to HDMI or DVI by an additional, passive adapter cable. For example:
DELOCK 82590: 1m, DisplayPort (male, 20p) to HDMI-A (male, 19p)
DELOCK 82435: 5m, DisplayPort (male, 20p) to DVI-D (male, 24p)
The integrated graphics automatically detects the connected display and puts out the appropriate electric signal - either DisplayPort (without an adapter) or HDMI/DVI (with an adapter).
However, a monitor with a DisplayPort connector cannot be connected to the HDMI port with a simple, passive adapter.
 Three independent displays simultaneously
The DS87 supports a maximum of two displays with a DVI or HDMI input. A third digital display, if required, must be connected directly to the DisplayPort output (without an adapter).
 Optional Wireless LAN module:
This Slim PC supports an optional WLAN module which consists of a half-size Mini-PCIe card with IEEE 802.11n functionality and an external antenna with an appropriate antenna cable. Shuttle offers a suitable accessory kit "WLN-S" with two antennas to increase WLAN range.
 4K Ultra-HD resolution
A 4K-display with Ultra-HD resolution (3840 x 2160) should be connected via DisplayPort, as only this port supports a higher refresh rate of 60Hz. Certain displays (e.g. Dell UP2414Q) however require MST mode (Multi-Stream Transport) to be enabled which sends two separate images at half resolution each to the display. These two images are then combined and put in correct order by the Intel graphics driver when in Collage mode. Please note that HBR2-mode (High Bit Rate 2) must be supported by each display to have two of them run at 4K resolution.
The video playback performance depends on the video format, bit rate and the processor used. Daily office applications usually won't require the system to run under full load, however for smooth 4K (2160p) video playback requirements are different. An Intel Core i3 processor or higher is required here, since the performance of the integrated graphics engine of a Celeron or Pentium processor is not suffice.
 Optional accessory: Drive bay cover
If the XH170V is used without an optical slimline drive, this cover helps close the open bay which can be particularly important in public institutions and prevent from dust and objects being inserted inappropriately. Please contact Shuttle for the optional accessory "Mylar POI-MY01".
 High ambient temperature
For high ambient temperature over 40°C we strongly recommend to use SSDs instead of hard disk drives.
 The optional accessory PHD4 allows for installation of one 3.5" hard drive. However doing so means no other drives such as a slimline DVD drive or a 2.5" HDD/SSD can be used.
 Power connector for SATA drives
The supplied power cables for SATA drives provide a voltage of 5V. Only in very exceptional cases a 2.5" hard disk also requires a 12V line, which are not supported out-of-the-box (only via an optional adapter which is included with PHD4).
 Installation of Windows 7
Intel® 100 chipset series has removed their support for the Enhanced Host Controller Interface (EHCI) which is the driver software for the USB 2.0 ports. The new chipset only supports the updated Extensible Host Controller Interface (xHCI for USB 3.0) which is not supported by the original Windows 7 installation disk. This means, that peripheral devices connected by USB (like keyboard, mouse and external optical drive) do not work during the Windows 7 Installation. As a solution please add the required USB 3.0 drivers to the Windows 7 installation files - this procedure is explained in the Shuttle FAQ section at
Chcete se o produktu dozvědět více? Napište nám
KUPTE TOTO ZBOŽÍ DNES A ZAPLAŤTE JEJ AŽ PO VYZKOUŠENÍ.
KUP NAJISTO - Nová platební služba pro jistotu při nakupování.
Vyzkoušejte vaše zboží doma, zaplaťte za 14 dní.
Pro schválení služby Kup Najisto budete přesměrováni na stránky pro ověření Vaší identity. Podle výše Vašeho nákupu můžeme k ověření Vaší identity požadovat i rodné číslo, případně číslo občanského průkazu.
Údaje zpracováváme zabezpečeně a v souladu se Zákonem o ochraně osobních údajů.
Platební služba Kup Najisto není určena pro podnikatele a firmy (držitelé IČ).